Specialty Antennas
The size, cosmetic or physical requirements of many RF products calls for innovative and unusual antenna styles designed to address such specialized requirements. From internally embeddable "SPLATCHES" to glass-mount patches, you may find the perfect antenna to address your product's unique needs available right here.

JJB Series
This tiny permanent-mount antenna is ideal for applications requiring an internal or small external antenna with performance close to that of a 1/4-wave whip. Available in a right angle or straight form. The antenna attaches directly to a user's PCB.

WRT Series
The WRT Series antenna is ideally suited for applications such as wireless vending, security, traffic, or power equipment which require an unobtrusive, tamper-resistant antenna solution. The tiny 19 x 11mm radome installs through a small hole on the product and is anchored by a threaded base.

HE Series
HE Series antennas are designed for direct PCB mounting. Thanks to the HE's compact size, they are ideal for internal concealment inside a product's housing. The HE is also very low in cost, making it well-suited to high-volume applications.

SP Series "The Splatch"
The Splatch uses a grounded-line technique to achieve outstanding performance from a tiny surface-mount element. This unique antenna is designed for hand- or reflow-mounting directly to a product's circuit board. Its low cost makes it ideal for volume applications. Unlike many compact antennas, the Splatch exhibits good proximity performance, making it an appropriate choice for handheld applications such as remote controls, pagers, and alert devices.

Chip Antennas
These tiny SMD ceramic chip antennas are ideal for applications requiring an ultra-compact, low-cost, internal antenna solution. The proprietary design and formulation of these antennas enables them to deliver outstanding performance and stability in one of the world's smallest packages.

DBD Series
The DBD Series is a low-profile, dual-band antenna that combines a high-efficiency, amplified GPS antenna with a choice of either a wide-band ISM or a broadband cell element. Housed in a weather-tight, tamper-resistant dome, the DBD Series is ideal for mounting on devices such as vehicles, vending machines, or equipment housings.

MHW Series
MHW Series dipole antennas feature a durable, unobtrusive housing that sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antennas are well suited to low-power devices, but are capable of operation at levels to 10 watts.

HDP Series
The HDP Series is a compact, center-fed antenna that achieves efficient operation at either or both of two frequency bands. Its durable, unobtrusive housing attaches permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc.

VDP Series
The VDP Series is a compact, center-fed antenna achieves efficient operation at any or all of three frequency bands. Its durable, unobtrusive housing attaches permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc.

RMS Series
The RMS is a compact, unobtrusive, dual-band antenna covering the 860 to 960MHz and 1.77 to 1.88GHz bands. Its durable, unobtrusive housing is designed for permanent mounting through a metal surface such as an automobile roof or trunk. The antenna is supplied with 14 feet (12.5m) of RG-58 cable and attaches via a TNC or Part 15 compliant RP-SMA connector.

RMT Series
The RMT is a futuristic-looking dual-band antenna covering the 860 to 960MHz and 1.77 to 1.88GHz bands. Its compact, durable housing is designed for permanent mounting through a metal surface such as an automobile roof or trunk. The antenna is supplied with 14 feet (12.5m) of RG-58 cable and attaches via a TNC or Part 15 compliant RP-SMA connector.

RMG Series
The RMG Series combines a high-performance internal GPS antenna with a connector for mounting a secondary antenna. A wide range of connectorized antennas can be attached, enabling the coverage of all popular frequencies. The GPS antenna and connector are housed in a sleek, durable base intended for permanent through-hole mounting.

"Ant Skins" Antenna Covers
These inexpensive sleeves cover a low-cost internal element of a user's choosing (i.e., a wire, rod, or flexible shaft). They provide the ruggedness and cosmetic appeal of expensive whip antennas at a fraction of the cost and are designed to allow a wide range of mounting options.