Jump to content for Application Notes - Application notes for RF module and antenna design and development. >
LinxTechnologies.com  :  Support - Application Notes

Application Notes
A continuously-growing library of project notes and procedures. Great for the novice user or to pick up new ideas.

AN-00100
RF 101: Information for the RF Challenged

AN-00125
Considerations for operation within 260-470MHz band

AN-00126
Considerations for operation within 902-928MHz band

AN-00128
Data and Bi-directional Transmissions under Part 15.231

AN-00130
Modulation Techniques for low-cost RF Data Links

AN-00140
The FCC Road: Part 15 from concept to approval

AN-00150
Use and design of T-Attenuation Pads

AN-00155
Serial load techniques for HP Series 3 RF Modules

AN-00156
Reading The Tx ID From The MS And HS Decoders

AN-00157
Connecting to the Serial Interface on the MT Series Transcoders

AN-00160
Considerations For Sending Data Over a Wireless Link

AN-00200
SDM-USB-QS Programmer's Guide

AN-00201
Installing USB Drivers

AN-00232
General Considerations for Sending Data With The LC Series

AN-00300
Addressing Linx OEM Products

AN-00310
Encoder and Decoder Comparison

AN-00500
Antennas: Design, Application, Performance

AN-00501
Understanding Antenna Specifications and Operation

AN-Bundle
For your convenience, we've bundled all our Application Notes together.


Resource Documents


FCC Regulation Guide
There are hundreds of FCC regulations governing all aspects of RF usage. As an aid to understanding some of these regulations, Linx has put together a Resource Document which contains explanations of the approval process, Frequently Asked Questions, FCC contacts, test facilities, and relevant sections of CFR 47 Parts 2 & 15. They are provided as a courtesy by Linx for basic reference. Linx assumes no responsibility for their content or accuracy. For additional documents and information, you may also want to visit the FCC's website at www.fcc.gov.

ETSI EN 300 220-1 V1.3.1 (2000-09)
European Standard (Telecommunications series)
Part 1: Technical characteristics and test methods

ETSI EN 300 220-2 V1.3.1 (2000-09)
European Standard (Telecommunications series)
Part 2: Supplementary parameters not intended for conformity purposes

ETSI EN 300 220-3 V1.1.1 (2000-09)
Candidate Harmonized European Standard (Telecommunications series)
Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

Holtek type Encoder/Decoder Data Structure
Data Structure for Holtek Type 10-Bit Address, 8-bit Data Encoder/Decoder.