SMB Connectors

Specifications

• SMB Specifications

Right Angle Surface Mount Jack Receptacle

Part #	Cable	Insulation	Minimum Quantity
CONSMB017-SMD	N/A	Teflon	1000
Finish Gold-plated center contact and body CONSMB017-SMD Diagram

Square Flange Jack Receptacle

Part #	Cable	Insulation	Minimum Quantity
STD-24-04-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-04-TGN Diagram

Straight Plug Crimp

Part #	Cable	Insulation	Minimum Quantity
STD-24-05L1-TGN	RG174/316	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-05L1-TGN Diagram

Straight Plug Crimp

Part #	Cable	Insulation	Minimum Quantity
STD-24-05M1-TGN	RG178	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-05M1-TGN Diagram

Straight Jack Crimp

Part #	Cable	Insulation	Minimum Quantity
STD-24-06L1-TGN	RG174/316	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-06L1-TGN Diagram

Straight Jack Crimp

Part #	Cable	Insulation	Minimum Quantity
STD-24-06M1-TGN	RG178	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-06M1-TGN Diagram

Straight Bulkhead Jack Crimp

Part #	Cable	Insulation	Minimum Quantity
STD-24-07L1-TGN	RG174/316	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-07L1-TGN Diagram

Straight Bulkhead Jack Crimp

Part #	Cable	Insulation	Minimum Quantity
STD-24-07M1-TGN	RG178	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-07M1-TGN Diagram

Bulkhead Jack - Jack

Part #	Cable	Insulation	Minimum Quantity
STD-24-08L1-TGN	RG174/316	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-08L1-TGN Diagram

Bulkhead Jack - Jack

Part #	Cable	Insulation	Minimum Quantity
STD-24-08M1-TGN	RG178	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-08M1-TGN Diagram

Straight Bulkhead Jack Receptacle (Rear Mount)

Part #	Cable	Insulation	Minimum Quantity
STD-24-091-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-091-TGN Diagram

Straight Bulkhead Jack Receptacle (Front Mount)

Part #	Cable	Insulation	Minimum Quantity
STD-24-101-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-101-TGN Diagram

Straight Bulkhead Jack Receptacle (Recessed Front Mount)

Part #	Cable	Insulation	Minimum Quantity
STD-24-111-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-111-TGN Diagram

Right Angle PCB Mount Jack Receptacle

Part #	Cable	Insulation	Minimum Quantity
STD-24-122-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-122-TGN Diagram

PCB Mount Plug Receptacle

Part #	Cable	Insulation	Minimum Quantity
STD-24-131-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-131-TGN Diagram

Surface Mount Plug Receptacle

Part #	Cable	Insulation	Minimum Quantity
STD-24-132-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-132-TGN Diagram

PCB Mount Jack Receptacle

Part #	Cable	Insulation	Minimum Quantity
STD-24-142-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-142-TGN Diagram

Surface Mount Jack Receptacle

Part #	Cable	Insulation	Minimum Quantity
STD-24-143-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-143-TGN Diagram

Plug - Plug

Part #	Cable	Insulation	Minimum Quantity
STD-24-15-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-15-TGN Diagram

Jack - Jack

Part #	Cable	Insulation	Minimum Quantity
STD-24-16-TGN	N/A	Teflon	1000
Finish Gold-plated center contact and nickel-plated body STD-24-16-TGN Diagram

• Home
  • Contact Us
• Products
  • RF Modules
    • RF Module Search
    • LT Series
    • LR Series
    • LC Series
    • KH2 Series
    • ES Series
    • HP3 Series
    • SG Series GPS Receiver Module
    • SR Series GPS Receiver Module
    • BBA Series Broadband Amplifiers
  • Integrated Circuits
    • MT Series
    • HS Series
    • MS Series
    • LS Series
    • Holtek Encoders and Decoders
  • OEM Products
    • OEM Product Search
    • OEM Customization Program
    • Relay Function Module 2
    • AC Function Module
    • HH TX Accessories
    • HS Compact Handheld Transmitter
    • HS Long-Range Handheld Transmitter
    • MS Keyfob Transmitter
    • MS Compact Handheld Transmitter
    • MS Long-Range Handheld Transmitter
    • Keyfob Transmitter
    • Compact Handheld Transmitter
    • Long-Range Handheld Transmitter
    • Full-Size Handheld Transmitter
  • Interface Modules
    • QS Series
  • Antennas
    • Antenna Search
    • Embeddable Antennas
      • CHP Series Chip Antennas
      • SP Series 'The Splatch'
      • JJB Series
      • JJB-HT Series
      • HE Series
    • Monopole Antennas
      • CHP Series Chip Antennas
      • LP Series
      • SP Series 'The Splatch'
      • WRT-MON Series
      • JJB Series
      • JJB-HT Series
      • HE Series
      • RA Series
      • CW Series
      • RH Series
      • HWR Series
      • RCS Series
      • PW Series
      • HD Series
      • RAH Series
      • HW Series
      • RMT Series
      • RCL Series
      • RMS Series
      • PMC Series
    • Dipole Antennas
      • OC Series
      • CW Series
      • HWR Series
      • RCT Series
      • PW Series
      • MHW Series
      • WRT Series
      • RAF Series
      • HW Series
      • CT Series
      • RCL Series
      • PML Series
      • VDP Series
      • HDP Series
    • High Gain Antennas
      • OC Series
      • YG Series
      • OM Series
      • DB1-LP Series
      • PN Series
    • Specialty Antennas
      • CHP Series Chip Antennas
      • SP Series 'The Splatch'
      • WRT-MON Series
      • JJB Series
      • JJB-HT Series
      • HE Series
      • MHW Series
      • Ant Skins Antenna Covers
      • WRT Series
      • RMT Series
      • VDP Series
      • RMS Series
      • HDP Series
    • Dual-Band Hole-Mount Antennas
      • RMT Series
      • RMS Series
    • Magnetic Base Antennas
      • MAG Series
      • ELE Series
    • GPS Antennas
      • SH Series
      • UC Series
    • Fixed Point Antennas
      • YG Series
      • OM Series
      • DB1-LP Series
      • OM-DW Series
      • PN Series
    • Antenna Eval Kits
      • CHP Series Antenna Eval Kit
      • SP Series Antenna Eval Kit
      • Connectorized Antenna Eval Kit
      • Permanent Mount Antenna Eval Kit
    • Custom Antennas
  • Connectors
    • RP-SMA Connectors
    • SMA Connectors
    • RP-MCX Connectors
    • MCX Connectors
    • RP-MMCX Connectors
    • MMCX Connectors
    • RP-BNC Connectors
    • BNC Connectors
    • RP-TNC Connectors
    • TNC Connectors
    • SMB Connectors
    • N Connectors
    • Crimping Kits
    • Battery Holders
    • Cable Assemblies
    • Custom RF Coax Cable Assemblies
  • Eval Kits and MDEV Systems
    • LT Series Eval Kit
    • LR Series Eval Kit
    • LC Series Eval Kit
    • KH2 Series Eval Kit
    • ES Series Eval Kit
    • ES Series MDEV System
    • HP3 Series MDEV System
    • SG Series GPS MDEV System
    • SR Series GPS MDEV System
    • MT Series MDEV System
    • HS Series MDEV System
    • MS Series MDEV System
    • Keyfob Transmitter Eval Kit
    • Compact HH TX Eval Kit
    • Long-Range HH TX Eval Kit
    • Full-Size HH TX Eval Kit
    • MS Keyfob Transmitter MDEV System
    • MS Compact HH TX MDEV System
    • MS Long-Range HH TX MDEV System
    • HS Compact HH TX MDEV System
    • HS Long-Range HH TX MDEV System
    • QS Series MDEV System
    • CHP Series Antenna Eval Kit
    • SP Series Antenna Eval Kit
    • Connectorized Antenna Eval Kit
    • Permanent Mount Antenna Eval Kit
• Distributors
• Pricing/Sales
• Support
  • Knowledgebase
    • RF Modules
      • Can multiple transmitters be used in proximity?
      • Which is the best frequency to use for my application: 315MHz, 418MHz, 433.92MHz, or 900MHz?
      • Which RF modules have the longest range?
      • Which products are FCC precertified?
      • Can I use a high gain antenna to extend the range of Linx RF modules?
      • Why is the type of data to be sent important when selecting a module?
      • Can the transmitters and receivers be used to make a transceiver?
      • Which module should I use for my application?
      • How can I extend the range of Linx RF modules?
      • Don't I need the LR transmitter to get the 3,000 foot range?
      • How can I power the ES series transmitter with 5 volts?
      • Can I use the LR receiver to extend the range of my OEM transmitter?
      • The DATA line of the LR receiver seems to switch randomly when the transmitter is not on.
      • Does Linx supply samples or donations to educational institutions?
      • What is multipath?
      • Any plans for a 2.4GHz module?
      • Why does Linx require the purchase of an evaluation kit prior to selling the modules?
      • Can a relay be controlled with Linx RF modules?
      • Does Linx have sockets for the surface mount modules so that they can be mounted onto a protoboard without being soldered?
      • Can the modules be potted?
    • OEM Products
      • Can multiple transmitters be used in proximity?
      • Which products are FCC precertified?
      • How do I set the address for my OEM transmitter and OEM receiver?
      • What is the data structure of the keyfobs and handhelds?
      • Which receiver do I need to use with the keyfobs and handhelds?
      • Can I put my company's logo or custom markings on your OEM products?
    • Antennas and Connectors
      • What does the ground plane have to do with the antenna?
      • Are Antenna Factor antennas matched to 50 ohms?
      • How can I tell the frequency of an Antenna Factor antenna?
      • Can I put my company's logo or custom markings on your antennas?
      • What is a reverse polarity (RP) connector?
    • FCC
      • How much does FCC certification cost?
      • What does FCC certification involve? How complicated is it and how long does it take to complete?
      • Is there a list of FCC authorized test laboratories so that I may find one in my area?
      • Do I or my customer need a license to operate a wireless link?
      • Where can I obtain a copy of the FCC rules and regulations?
      • How close to the products tested are production units required to be?
      • Where can I look up information on equipment if I know the FCC ID#?
      • What if my intended use or application does not seem to have been clearly addressed by the FCC?
      • What if my application is denied and I don't think the FCC correctly understood my product?
      • Does the receiver need to be FCC certified?
  • Documentation
  • Application Notes
  • Software
  • FCC Test Labs
• News
• Company
  • Contact Us
  • Company Profile
  • Careers
  • Sales Policies
  • Privacy Policy

Looking for RF design help? Visit Apex Wireless. Compact, Tamper-Resistant Monopole Antenna Now Available Dual-Band Antennas Now Available With SMA Connectors

• CN Series Antenna EOL
• RMG Series Antenna EOL
• HP3 Series RX Change Notice
• CMD-HHCP Poly Dome EOL
• CMD-HHLR Poly Dome EOL
• Keyfob Kit Change Notice