Software

10-Bit Encoder/Decoder Data Structure
This handy chart shows the data structure for the 10-bit Holtek encoder/decoders which used in many Linx evaluation systems, OEM products, and the popular KH series RF modules. This chart is particularly useful for programmers who wish to interface with these devices.
Data Loop Example
This file contains the Visual Basic source code for a program that will send a string of characters to the QS Series USB module and read it back. This program requires that the DATA_IN and DATA_OUT lines on the module be connected together. The software makes use of the Direct Drivers and shows how to use the functions in a simple routine.
ES/HP3 Master Development Software
Latest software which is included with the ES/HP3 master evaluation kits. Demonstrates the RS-232 portion of the evaluation kit. (Requires Windows 95 or higher.)
GPS Master Development Software
Latest software (version 1.1) which is included with the GPS Master Development System. Demonstrates the functionality of Linx GPS modules. (Requires Windows 2000 or higher.)
HP3 Serial Loading Code
This sample code demonstrates the ease of loading a channel selection into an HP-3 transmitter or receiver using the popular PIC micro controller. This routine is ready for use in your own program or to serve as a starting point for your own code development.
HS Series Master Development Software
Latest software which is included with the HS Master Development System. Demonstrates the use and functionality of the HS Series encoders and decoders. (Requires Windows 95 or higher.)
Linx Component PCB Footprints and Schematic Symbols
This library contains PCB footprints and schematic symbols for our products in Altium format. It includes RF modules, interface modules, antennas, connectors, encoders, decoders and the battery holder. It is provided as a courtesy to our customers. It is up to the designer to correctly import the library and implement the parts. Linx provides no support or warranty for the library and accepts no responsibility for its implementation.
Microstrip Calculator
A microstrip is often used between an RF module and its antenna. This handy calculator was developed to assist customers in quickly calculating the correct trace width for their PCB. The calculator requires Microsoft Excel.
MS Series Master Development Software
Latest software which is included with the MS Master Development System. Demonstrates the use and functionality of the MS Series encoders and decoders. (Requires Windows 95 or higher.)
MS Series TX_ID Sample Code
This file contains sample source code for reading the TX_ID output by the MS Series decoder. This code is described in Application Note AN-00156.
MT Series Master Development Software
Latest software which is included with the MT Master Development System. Demonstrates the use and functionality of the MT Series transcoder. (Requires Windows 2000 or higher.)
QS EEPROM Programmer
The Linx QS Series USB module can be programmed to display a custom name, description, and manufacturer ID as well as a unique serial number so that it can be distinguished from other modules on the same bus. The Linx QS Series programmer is an executable that can program this information to the module's on board EEPROM through the USB bus.
QS Series Master Development Software
Latest software which is included with the QS Master Development System. Demonstrates the use and functionality of the QS Series USB module. (Requires Windows 95 or higher.)