RF Modules, Integrated Circuits & Interface Modules
Modules and antennas are the only RF components you need to add wireless features to your product. They save you the hassle and expense of engineering RF functionality from scratch. The modules are already tested, so you don't need to spend time tuning discrete components or setting registers.
HumPROTM Series RF Transceiver Module
Frequency Hopping Digital Data RF Transceiver Module
The HumPRO™ Series is a Frequency Hopping Spread Spectrum (FHSS) transceiver designed for the reliable transfer of digital data. It has a very fast lock time (<60ms typ) so that it can quickly wake up, send data and go back to sleep, saving power consumption in battery-powered applications that have strict power budgets. Built on the Linx Hummingbird platform, the module is below $10 in volume, effectively competing with discrete designs. Two versions are available with FCC and Industry Canada certifications as well as a non-certified version that is smaller and lower cost.
HumDTTM Series Wireless UART Data RF Transceiver Module
Low-Cost, Frequency Agile Digital Data RF Transceiver Module
At below $10 in volume, the Hummingbird platform is the lowest cost complete wideband transceiver with microcontroller module on the market today. The HumDT™ is built on this platform and is designed for reliable wireless digital data transfer. It includes a frequency agile protocol and supports versions at 868 and 900MHz with a common footprint and pin out.
HumRCTM Series RF Remote Control and Sensor Transceiver Module
Spread Spectrum RF Remote Control Transceiver Module
At below $9 in volume, the Hummingbird platform is the lowest cost complete wideband transceiver with microcontroller module on the market today. The HumRC™ is built on this platform and is designed for reliable bi-directional remote control and sensor applications. It includes a Frequency Hopping Spread spectrum (FHSS) protocol and supports versions at 2.4GHz and 900MHz with a common footprint and pin out.
RF Module Evaluation & Development Kits
RF module evaluation kits and master development systems help you develop hardware and software using Linx modules. Each kit comes with two evaluation or development boards for benchmarking and prototyping, each of which is populated with one or more modules. A prototyping area gives you a place to develop circuitry. To help you get started, each kit also includes antennas and extra modules. Compared to an evaluation board, a development board has a larger prototyping area and an interface for connecting to a PC.
KH3 Series RF Transmitter/Encoder and Receiver/Decoder Modules
RF Transmitter and Receiver with Integrated Encoder and Decoder
The KH3 Series modules are ideal for wireless remote control and command applications. The transmitter combines the highly-optimized SAW-based LC Series RF transmitter with the DS Series encoder. The receiver combines the advanced synthesized LR Series receiver with the DS Series decoder. Both modules are configured to use the Holtek protocol and be backwards compatible with previous generations of the KH Series.
25 Series RF Transceiver Module
Wireless UART RF Transceiver Module
The 25 Series RF transceiver module is designed for reliable bi-directional transfer of digital data over distances of up to 1 mile (1.6km) line of sight. Operating in the 902 to 928MHz frequency band, the module is capable of generating +13dBm into a 50-ohm load and achieves an outstanding typical sensitivity of -105dBm.
250 Series RF Transceiver Module
High Power Wireless UART RF Transceiver Module
The 250 Series RF transceiver module is designed for reliable bi-directional transfer of digital data over distances of up to 4 miles (6.4km, line of sight). Operating in the 902 to 928MHz frequency band, the module is capable of generating +23.5dBm into a 50-ohm load and achieves an outstanding typical sensitivity of -105dBm. This high output power gives the module exceptional range and also helps overcome noisy environments at shorter ranges.
DTS Series & EUR Series RF Transceiver Module
Wireless UART RF Transceiver Module
The DTS and EUR Series combine a low power 868MHz or 900 MHz wireless transceiver with a powerful multipoint-to-multipoint protocol controller to form a complete wireless communication solution capable of replacing wires in almost any RS-232/422/485 application. The module has a Universal Asynchronous Receiver Transmitter (UART) serial interface that can be connected directly to microcontrollers, RS-232 converters or USB adaptors. The module automatically handles all radio functions resulting in a UART-to-antenna wireless link.
DP1203 Series RF Transceiver Module
Radio-Only RF Transceiver Module
The DP1203 Series is a radio-only RF transceiver module. It is designed for the wireless transmission of digital data at data rates of up to 152.3kbps. Operating in the 433, 868 and 915MHz license-free ISM (Industrial Scientific and Medical) frequency bands it is ideal for applications that require full control of the radio channels and configuration without having to go through the effort and expense of a discrete RF design.
TT Series RF Remote Control Transceiver Module
RF Transceiver Module for Long Range Remote Control
The TT Series RF transceiver module is designed for reliable bi-directional, long-range remote control applications. All remote control functions are integrated, so a basic system can be created without any programming. Operating in the 900MHz band, it makes use of Frequency Hopping Spread Spectrum (FHSS) technology, which gives it more immunity to interference and allows a higher transmit power. This gives the module longer range (over a mile line-of-sight) than non-spread spectrum devices and better performance within that range.
NT Series RF Transceiver Module
Transceiver for Wireless Data Transfer
The NT Series is an FM transceiver module family that is designed for bi-directional wireless data transfer. The 868MHz version is suitable for European operation and the 900MHz version is suitable for North and South America. The modules have exceptional sensitivity, giving them outstanding range of up to 3,000 feet (914 meters, line of sight). Current consumption and low power states are optimized for battery-powered devices.
LT Series RF Transceiver Module
Long Range Wireless Transceiver Module
The LT Series transceiver is ideal for the low-cost, bi-directional wireless transfer of serial data, control, and command information in the favorable 260 to 470MHz band. Thanks to an advanced, synthesized architecture, this RF transceiver can form a reliable wireless link capable of transferring data at rates of up to 10,000bps over distances of up to 3,000 feet (1,000m).
LR Series RF Transmitter and Receiver Modules
Longer Range Transmitters and Receivers for Digital Data
Send or receive digital data, control or command information with LR Series transmitter and receiver modules. Use the receiver with a matching or compatible Linx transmitter for reliable one-way wireless communication at 315MHz, 418MHz or 433MHz. Compared to 2.4GHz modules, narrowband modules from Linx provide longer range and lower current consumption at a more cost-effective price.
LC Series RF Transmitter Module
Low Cost Transmitter for Digital Data
The LC Series RF transmitter is ideally suited to a wide variety of remote control, command, and monitoring applications. It utilizes a highly-optimized SAW architecture to achieve good performance at a low cost. When the transmitter is paired with a matching LR Series receiver or an LT Series Transceiver, a reliable wireless link is formed capable of transferring serial data at rates of up to 5,000bps over distances of up to 1.5 miles (2,500m) depending on implementation.
KH2 Series RF Transmitter/Encoder and Receiver/Decoder Modules
Transmitters and Receivers for Digital Data with Integrated Encoders and Decoders
Not recommended for new designs. This product is approaching EOL. Please contact Linx about the KH3 Series, which replaces the KH2.
Trigger discrete actions with button presses or contact closures by using KH2 Series transmitter/encoder and receiver/decoder modules. They contain Holtek chips and LR Series RF modules. The KH2 Series provides a low level of security. It lets you send commands from multiple transmitters to distinct receivers in the same vicinity through physical addressing. Use KH2 Series modules together or with compatible Linx components for reliable one-way wireless communication at 315MHz, 418MHz or 433MHz. Compared to 2.4GHz modules, narrowband modules from Linx provide longer range and lower current consumption at a more cost-effective price.
ES Series RF Transmitter and Receiver Modules
Digital and Analog Wireless Transmitter and Receiver Modules
The ES Series is ideal for the reliable transfer of digital data and analog waveforms, such as audio. Available at 916MHz for North and South America and 869MHz for Europe, the ES Series uses a synthesized archetecture to transfer data at up to 56,000bps over distances of up to 1,000 feet (300m) depending on implementation.
MT Series Remote Control Transcoder
Bi-Directional Remote Control Transcoder
MT Series transcoders are designed for bi-directional remote control applications. Eight status lines can be set up in any combination of inputs and outputs for the transfer of button or contact states. An automatic acknowledgement indicates that the transmission was successfully received. The large, twenty-four bit address size makes transmissions highly unique, minimizing the possibility of conflict between multiple devices. A Serial Interface Engine (SIE) allows configuration and control of the transcoder by an external microprocessor or PC. When activated, the transcoder encodes the current input states and its address into a packet and outputs a digital data stream. This data can be sent to a receiving unit by RF modules, infrared link or even a wire. The receiving unit checks the received packet to make sure there are no errors and that the received address has been learned. If everything is good, then the transcoder replicates the received input states on its outputs. These outputs are connected to whatever circuitry is required by the application. The receiving unit then sends an acknowledgement to indicate that the command was successfully received.
An important change notice for this product is available.
MS Series Remote Control Encoder & Decoder
Integrated Circuits with Medium Security
Trigger discrete actions with button presses or contact closures by using MS Series encoders and decoders with compatible Linx RF modules. The MS Series provides a medium level of security. It lets you send commands from multiple transmitters to distinct receivers in the same vicinity through digital addressing. It can be used with NT Series, LT Series, LR Series, LC Series, KH2 Series, ES Series and HP3 Series RF modules. For most applications, the MT Series transcoder provides better flexibility at a more cost-effective price. Consider using the MT Series for new designs.
An important change notice for this product is available.
DS Series Encoder/Decoder
Remote Control Encoder/Decoder with DIP Switch Addressing
The DS Series Basic Evaluation Kit is a quick way to evaluate the field performance of the DS Series encoder/decoder and verify the performance of a custom design. The kit features two fully assembled evaluation boards that combine the DS Series with LR Series RF modules to implement a complete remote control solution. This allows for range and interference testing in the actual use environment.
HS Series Remote Control Encoder & Decoder
High Security Encrypted Remote Control Encoder and Decoder
The HS Series is an ideal encoder and decoder for one-way remote control and Remote Keyless Entry (RKE) applications requiring the highest level of security. The series uses CipherLinx®-encrypted remote control technology, which is based on a core algorithm developed by the United States National Security Agency (NSA). The encoder and decoder also offer numerous innovative features, including up to 8 data lines, multiple baud rates, individual "button level" user permissions, an optional keypad PIN, encoder identity output, low power consumption, and easy "programming-free" setup.
LS Series Remote Control Encoder & Decoder
Integrated Circuits with No Security
Trigger discrete actions with button presses or contact closures by using LS Series encoders and decoders with compatible Linx RF modules. The LS Series lets you send commands from multiple transmitters to all receivers in range. It’s best for simple applications that do not need any security measures. It can be used with NT Series, LT Series, LR Series, LC Series, KH2 Series, ES Series and HP3 Series RF modules. For most applications, the MT Series transcoder provides better flexibility at a more cost-effective price. Consider using the MT Series for new designs.
QS Series USB Interface Module
Connect your device to a USB port with the QS Series USB interface module. Use it to set up communication between a PC and a serial device such as a microcontroller, Linx RF module or legacy peripheral that has no native USB port.
HP3 Series RF Transmitter and Receiver Modules
Multiple-Channel Transmitters and Receivers for Analog and Digital Data
Send or receive digital and analog data including audio with HP3 Series multi-channel transmitter and receiver modules. Use the transmitter with a matching receiver to set up one-way wireless communication in the 902 to 928MHz band. The modules are available in surface-mount and pinned packages. Compared to 2.4GHz modules, narrowband modules from Linx provide longer range and lower current consumption at a more cost-effective price.