Skip to the main content

  • Remote Control Development Software

    The latest software included in the TT and RS Series Master Development Systems. Demonstrates the functionality of the Linx TT and RC Series RF Remote Control and Sensor Transceiver Modules.

  • Linx Component PCB Footprints and Schematic Symbols

    This library contains PCB footprints and schematic symbols for Linx products in Altium format. It includes modules, antennas, connectors and the battery holder. Linx provides no support or warranty for the library and accepts no responsibility for its implementation.

  • Microstrip Calculator

    A microstrip is often used between an RF module and its antenna. This calculator helps you calculate the correct trace width for the PCB. The calculator requires Microsoft Excel.

  • ES/HP3 Master Development Software

    The latest software included in the ES/HP3 master development systems. Demonstrates the RS-232 portion of the evaluation kit.

  • HP3 Serial Loading Code

    This sample code demonstrates the ease of loading a channel selection into an HP-3 transmitter or receiver using the popular PIC micro controller. This routine is ready for use in your own program or to serve as a starting point for your own code development.

  • GPS Master Development Software

    The latest software included in the GPS Series master development system. Demonstrates the functionality of Linx GPS receiver modules and GNSS receiver modules.

  • MT Series Master Development Software

    The latest software included in the MT Series master development system. Demonstrates the use and functionality of the MT Series transcoder.

  • MS Series Master Development Software

    The latest software included in the MS Series master development system. Demonstrates the use and functionality of the MS Series encoders and decoders.

  • MS Series TX_ID Sample Code

    This file contains sample source code for reading the TX_ID output by the MS Series decoder. This code is described in Application Note AN-00156.

  • HS Series Master Development Software

    The latest software included in the HS Series master development system. Demonstrates the use and functionality of the HS Series encoders and decoders. (Requires Windows 95 or higher.)

  • NT Series Master Development Software

    The latest software included in the NT Series master development system. Demonstrates the functionality of the NT Series Transceivers.

  • QS Series Master Development Software

    The latest software included in the QS Series master development system. Demonstrates the use and functionality of the QS Series USB module.

  • QS Series Certified Driver Installer

    Bundled file; automatically installs the drivers. Certified for Windows 2000, Windows XP/Vista/7 (32/64) and Windows Server 2003/2008 (32/64)

  • QS Series Certified Driver Package

    Separate files; no automatic installation. Certified for Windows 2000, Windows XP/Vista/7 (32/64) and Windows Server 2003/2008 (32/64)

  • QS EEPROM Programmer

    The QS Series USB module can be programmed to display a custom name, description, and manufacturer ID as well as a unique serial number so that it can be distinguished from other modules on the same bus. The QS Series programmer is an executable that can program this information to the module's onboard EEPROM through the USB bus.

  • QS C Header File

    Certified for Windows 2000, Windows XP/Vista/7 (32/64) and Windows Server 2003/2008 (32/64)

  • QS VB Header File

    Certified for Windows 2000, Windows XP/Vista/7 (32/64) and Windows Server 2003/2008 (32/64)

  • QS Data Loop Example

    This file contains the Visual Basic source code for a program that will send a string of characters to the QS Series USB module and read it back. This program requires that the DATA_IN and DATA_OUT lines on the module be connected together. The software makes use of the direct drivers and shows how to use the functions in a simple routine.